Cloverleaf 2500 BIO Bed Filter Pressure [CFBIOP25]

Estimated delivery time 3 working day/s


Click image to enlarge

Cloverleaf 2500 BIO Bed Filter (M25P)

Fluidised Bed filters to biological cater for extremely high level fish loads

2500 BIO Bed Filter (M25P) Description:

The dilemma of very high fish stocks overloading an existing filter system has frequently meant replacing the entire system or adding to it in a conventional manner, but often the case is that there is insufficient floor space (or finances) to execute either option. This is where the economical Fluidised Bed filter fully comes into its own, and providing that the existing system can adequately cater for mechanical filtration, then a vast improvement in water quality will be evident.

The ability of has been well documented. Only after considerable field and laboratory research can Cloverleaf offer the very best in FB’s – assisted greatly by the unique specification of silica sand used, and which is scientifically known to offer superior bacteria colonisation than that achieved by coral sand and other common types used. Studies would indicate that the unique Cloverleaf biomass silica media has such impressive properties that 3kg will support the same volume of beneficial bacteria that might otherwise only be achievable if using 50 sacks of average filter rock or gravel.

Fluidised Bed Type M25P Technical:

For ponds up to 2,500 gallons (11,250 litres)
Best served with a high pressure pump offering around 470gph
Final operational flow rates of around 250gph
Unit is approx 600mm high (24”) with a 110mm (4”) diameter core
Containing 3kg of silica sand
With standard 38mm (1.5”) inlet pipe manifold
Cloverleaf Side Valve on the inlet side (with non-return valve)
Outlet/gravity return is for 50mm (standard 2") rigid pipework

The bottom valve is used to control flow and balancing, with the top valve offering the close down facility to act as a bypass to the FB.

The M25P will support up to 50kg (110lb) of fish load.