NT Labs Filter Bugs - 250ml

Use when establishing a new filter, at the beginning of the pond season in spring, or when ammonia or nitrite are elevated. Filter Bugs is an easy-to use liquid formulation, containing a blend of Nitrosomonas, Nitrobacter, Nitrospira and supporting bacterial cultures.

These bacteria will repopulate your filter with nitrifying organisms to ensure efficient biological filtration and perfect, stable water quality.

How to use?

• Test your water.
• Measure out the required amount of Filter Bugs and add directly to the biological media within the filter.
• Switch off UV filtration for at least 24 hours after adding Filter Bugs to allow the nitrifying bacteria to colonise the filter and the pond.
• Filter Bugs should be added immediately after a substantial water change or pond clean, at the beginning of the pond season, after using a medicinal treatment or adding new fish, and whenever there is a detectable concentration of ammonia or nitrite in the water.
• Filter Bugs can be added once per week, or more often if desired.
• Filter Bugs can be used when Pond Salt Plus is present in the water at ‘General Tonic’ and ‘Anti-stress’ levels.

Warning:

• Ammonia and nitrite are toxic to fish. Their concentrations should be 0 ppm at all times and can be tested accurately using NT Labs Test Kits. If ammonia and nitrite are present at dangerous concentrations, carry out a partial water change before using Filter Bugs. Ensure the cause of poor water quality is identified (e.g. over-feeding, insufficient aeration, etc) and resolved to avoid causing stress to your fish.

  
  

  Treats 250ml - 9100 litres (2000 gallons)